Commercial Sales(863) 337-4984
Mon-Th 8-3PM ET Min $35.00 order excluding shipping
Commercial Sales(863) 337-4984
Mon-Th 8-3PM ET Min $35.00 order excluding shipping
0item(s)

You have no items in your shopping cart.

02475/02420 Taper Roller Bearings Belts

02475/02420 Taper Roller BearingsDimensions: 1.25" x 2.6875" x 0.875" Common Interchanges 02475/02420 Interchange information is provided as a guide only. Dimensional & performance differences may apply.Specifications Series | 02400Cone Part Number |... 02475/02420 Taper Roller BearingsDimensions: 1.25" x 2.6875" x 0.875" Common Interchanges 02475/02420 Interchange information is provided as a guide only. Dimensional & performance differences may apply.Specifications Series | 02400Cone Part Number |...
$16.86
Availability: Many In Stock
02475/02420 Taper Roller Bearings
Dimensions: 1.25" x 2.6875" x 0.875" Common Interchanges 02475/02420 Interchange information is provided as a guide only. Dimensional & performance differences may apply.

Specifications
Series | 02400
Cone Part Number | 02475
Cup Part Number | 02420
Design Unit | Inch
Cage Material | Stamped Steel
Dimensions d - Bore | 1 1/4 in31.750 mm
D - Cup Outer Diameter | 2.6875 in68.263 mm
B - Cone Width | 0.875 in22.225 mm
C - Cup Width | 0.6875 in17.463 mm
T - Bearing Width | 0.8750 in22.225 mm
Abutment and Fillet Dimensions R - Cone Backface "To Clear" Radius1 | 0.14 in3.600 mm
r - Cup Backface "To Clear" Radius2 | 0.06 in1.52 mm
da - Cone Frontface Backing Diameter | 1.52 in38.5 mm
db - Cone Backface Backing Diameter | 1.75 in44.5 mm
Da - Cup Frontface Backing Diameter | 2.52 in63.00 mm
Db - Cup Backface Backing Diameter | 2.32 in58.93 mm
Ab - Cage-Cone Front face Clearance | 0.06 in1.5 mm
Aa - Cage-Cone Backface Clearance | 0.03 in0.8 mm
a - Effective Center Location3 | -0.20 in-5.1 mm
Basic Load Ratings C90 - Dynamic Radial Rating (90 million revolutions)4 | 3720 lbf16500 N
C1 - Dynamic Radial Rating (1 million revolutions)5 | 14300 lbf63800 N
C0 - Static Radial Rating | 15800 lbf70200 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)6 | 2650 lbf 11800 N
Factors K - Factor 7 | 1.4
e - ISO Factor 8 | 0.42
Y - ISO Factor9 | 1.44
G1 - Heat Generation Factor (Roller-Raceway) | 17.5
G2 - Heat Generation Factor (Rib-Roller End) | 8.48
Cg - Geometry Factor 10 | 0.0681
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These maximum fillet radii will be cleared by the bearing corners.
  • 3 Negative value indicates effective center inside cone backface.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 5 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 7 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 Geometry constant for Lubrication Life Adjustment Factor a3l.

02475/02420 Taper Roller Bearings
Dimensions: 1.25" x 2.6875" x 0.875" Common Interchanges 02475/02420 Interchange information is provided as a guide only. Dimensional & performance differences may apply.

Specifications
Series | 02400
Cone Part Number | 02475
Cup Part Number | 02420
Design Unit | Inch
Cage Material | Stamped Steel
Dimensions d - Bore | 1 1/4 in31.750 mm
D - Cup Outer Diameter | 2.6875 in68.263 mm
B - Cone Width | 0.875 in22.225 mm
C - Cup Width | 0.6875 in17.463 mm
T - Bearing Width | 0.8750 in22.225 mm
Abutment and Fillet Dimensions R - Cone Backface "To Clear" Radius1 | 0.14 in3.600 mm
r - Cup Backface "To Clear" Radius2 | 0.06 in1.52 mm
da - Cone Frontface Backing Diameter | 1.52 in38.5 mm
db - Cone Backface Backing Diameter | 1.75 in44.5 mm
Da - Cup Frontface Backing Diameter | 2.52 in63.00 mm
Db - Cup Backface Backing Diameter | 2.32 in58.93 mm
Ab - Cage-Cone Front face Clearance | 0.06 in1.5 mm
Aa - Cage-Cone Backface Clearance | 0.03 in0.8 mm
a - Effective Center Location3 | -0.20 in-5.1 mm
Basic Load Ratings C90 - Dynamic Radial Rating (90 million revolutions)4 | 3720 lbf16500 N
C1 - Dynamic Radial Rating (1 million revolutions)5 | 14300 lbf63800 N
C0 - Static Radial Rating | 15800 lbf70200 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)6 | 2650 lbf 11800 N
Factors K - Factor 7 | 1.4
e - ISO Factor 8 | 0.42
Y - ISO Factor9 | 1.44
G1 - Heat Generation Factor (Roller-Raceway) | 17.5
G2 - Heat Generation Factor (Rib-Roller End) | 8.48
Cg - Geometry Factor 10 | 0.0681
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These maximum fillet radii will be cleared by the bearing corners.
  • 3 Negative value indicates effective center inside cone backface.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 5 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 7 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 Geometry constant for Lubrication Life Adjustment Factor a3l.

  • Any Product types that You want - Simple, Configurable, Bundled and Grouped Products
  • Downloadable/Digital Products, Virtual Products
  • Inventory Management with Backordered items
  • Customer Personalized Products - upload text for embroidery, monogramming, etc.
  • Create Store-specific attributes on the fly
  • Advanced Pricing Rules and support for Special Prices
  • Tax Rates per location, customer group and product type
  • Detailed Configuration Options in Theme Admin Penl
  • Any Product types that You want - Simple, Configurable, Bundled and Grouped Products
  • Downloadable/Digital Products, Virtual Products
  • Inventory Management with Backordered items
  • Customer Personalized Products - upload text for embroidery, monogramming, etc.
  • Create Store-specific attributes on the fly
  • Advanced Pricing Rules and support for Special Prices
  • Tax Rates per location, customer group and product type
  • Detailed Configuration Options in Theme Admin Penl
Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page